Research and Publications

List of Ph.D.Produced by the Department

LIST OF PH. D PRODUCED BY THE DEPARTMENT

S.NO	REG. NO.	SCHOLAR NAME	SUPERVISOR NAME	THESIS TITLE	COMPLETED YEAR
	71170331041	Prabahar.J	Dr.T.Balusamy	Investigation of Solar Still to augment productivity using various Techniques	2020
	11100331045	Rabi.J	Dr.T.Balusamy	Defect Analysis in friction Stir welding of aluminium alloy AA6082 through online Condition Monitoring System	2020
	71070331070	Sadhishkumar.S	Dr.T.Balusamy	Comparative performance studies on Flat plate and evacuated tube solar collectors for local climatic conditions	2020
	1514269112	Lenin V R	Dr. Sivalakshmi S	Numerical and experimental studies on Buoyancy-driven Natural Ventilation in residential buildings	2020
	1533050005	U Elaiyarasan	Dr.V.Satheeshkumar	A Study on Electrodischarge Coatiing of ZE41A Magnesium Alloy	2020
	71160331059	Saravanan K	Dr.R. Vijayan	Performance analysis of Domestic refrigerator with nano composite particles	2019
	1313269214	M Murugan	Dr.R. Vijayan	Performance enhancement of twist inserted solar collector using booster reflectors	2019
	11160331014	P Elumalai	Dr.R. Vijayan	Studies on the Performance of Eco-friendly Refrigerant Mixtures In a Small Capacity Window Air Conditioner	2019
	11170331020	Jayaraman.R	Dr.T.Balusamy	Studies on Mechanical Tribological and Microstructure characterisation of friction stir processed magnesium AZ91D Alloy	2019
	71070321090	Srinivasan.R	Dr.T.Balusamy	Experimental Investigation of solar dryer for different vegetables	2019
	71070331037	Krishnan.V.K	Dr.T.Balusamy	Experimental Investigation and numerical simulation of solar cooker	2019
	1232060005	D.Damodharan	Dr.A.P.Sathiyagnanam	Effective utilisation of waste plastic oil in a DI-diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions by multi response optimization	2018
	1232060006	Melvin Victor De Poures	Dr.A.P.Sathiyagnanam	Comparative evaluation and optimization of engine parameters in DI Diesel engine fueled with higher alcohol – Diesel blends	2018
	1232060007	K. Gopal	Dr.A.P.Sathiyagnanam	An Experimental Investigation Of Ligno-Cellulosic Biofuel Additives To Diesel Blends For Improvement Of Performance Combustion And Emission Characteristics Of A CI Engine	2018
15.	11170331008	Asokan M. A	Dr.R. Vijayan	Experimental investigation on the combustion, performance and emission characteristics of a DIFFERENT diesel engine using kapok oil(china pentandra) methyl ester/diesel blends	2018
16.	1232040004	S. Gowthaman	Dr.A.P.Sathiyagnanam	Experimental Investigation on Performance, Emission and Combustion characteristics of HCCI Mode Engine Fuelled with Different Fuels	2017
17.	7087033132	M Raja	Dr.R. Vijayan	Effect of Al2o3-Water Nanofluid on Thermal Performance of Shell and Tube Heat Exchanger with Wire Coil Insert	2016
18.	1132060001	K.Vijayaraj	Dr.A.P.Sathiyagnanam	Experimental and Theoretical Investigation on Combustion Analysis of a Diesel Engine fuelled with Biodiesel	2016
19.	1232040005	K.Velmurugan	Dr.A.P.Sathiyagnanam	Effect of antioxidant additives on NOx emissions from different methyl ester fuelled DI diesel engine	2016
20.	100970322003	Sivalakshmi.S	Dr.T.Balusamy	Investigation on the performance of a DI Diesel Engine fuelled by AZADIRAXHTA INDICA methyl ester blended with oxygenated organic compounds	2013

Scholars doing Research in the Department

Details of Scholars doing Research in the Mechanical Department

SL.No	Name of the Supervisor	Regular	Part-Time
1	Dr.T.Balusamy	-	1
2	Dr.S.Sivalakshmi	-	-
3	Dr.M.Raja	2	-
4	Dr.A.P.Sathiyagnanam	-	2
5	Dr.V.Satheeshkumar	-	2

Faculty Publications

RESEARCH AND PUBLICATIONS

S.NO	NAME	Publication details	VOL &PP	DOI	WEB OF SCIENCE
1	Dr.R.Vijayan	Enhancing Convective Heat Transfer in a Double-Glazing V-Trough Solar Collector using Horizontal and Vertical Wing Cut Twisted Tape Inserts	Vol.22 P 312	ISSN: 1748-0345	TAGA JOURNAL VOL. 14
2	Dr.V.Satheeshkumar	Effect of Electrical Discharge Coating on ZE41A Magnesium Alloy Using Sintered WC/Cu Composite.	Vol.13, Issue.3, PP.381-387. May 2018	DOI:10.1166/jamr.2018.1406	Journal of Advanced Microscopy Research,
3	Dr.V.Satheeshkumar	Modelling of Electrical Discharge Coating Parameters Using Artificial Neural Network	Vol.13, Issue.1, PP.79-84. January 2018.	DOI: https://doi.org/10.1166/jamr.2018.1361	Journal of Advanced Microscopy Research,
4	Dr.S.Ayyappan	Optimization of parameters influencing the dynamic behavior of a banana fiber-reinforced hybrid polymer matrix	Vol. 8(1) PP 1–12	DOI:10.1615/CompMechComputApplIntJ.v8.i1.20	Composites: Mechanics, Computations, Applications. An International Journal
5	Dr.K.Sakunthala	Study of Exhaust Emission Characteristics by Ceramic Coated Diesel Engine using Rubber Seed Oil Blend with Pure Diesel Fuel	Vol 12 PP 685-693	ISSN 0973-6077	International Journal of Applied Environmental Sciences

Publication Details: (2017-2018)

S.NO	NAME	Publication details	VOL &PP	DOI	WEB OF SCIENCE
1	Dr.V.Satheeshkumar	A Study on Wear Behavior of Electrical Discharge-Coated Magnesium Alloy	Vol. 5(1), pp.01-09, January 2019.	https://doi.org/10.1007/s40735-019-0222-z	Journal of Bio- and Tribo Corrosion,
2	Dr.V.Satheeshkumar	Experimental analysis of electrical discharge coating characteristics of magnesium alloy using response surface methodology	Vol.5, Number 8, PP.01-08, July 2018.	DOI:10.1088/2053-1591/aad11f	Materials Research Express
3	Dr.R.Vijayan	Performance enhancement of centrally finned twist inserted solar collector using corrugated booster reflectors	Vol.168 PP 858 - 869	https://doi.org/10.1016/j.energy.2018.11.134	Energy -Elsevier
4	Dr.R.Vijayan	GA based optimal design of double glazing v-trough solar collector using horizontal and vertical wing cut twisted-tape inserts	Vol.14, PP 2799-2822.	ISSN: 1748-0345	TAGA Journal of Graphic Technology
5	Dr.R.Vivekananthan	The Modelling of Contact Force of the Robot Gripper for Deformable Object using Finite Element Method	Vol.8 579-588	ISSN(P) :2249 -6890 ISSN(E) :2249 -8001	International journal of Mechanical and Production Engineering Research and Development
6	Prof.P.Natarajan	Development of Numerical Model for Predicting the Characteristics of Ni-SiC Nano Composite Coatings on AISI1022 Substrate	Vol. 6	DOI:10.1088/2053-1591/ab1ac4	Materials Research Express
7	Dr.T.Balusamy	Behavior of Hydrogen in Industrial Scale Steel Melts	Vol 71 PP 2505- 2515	DOI:10.1007/s12666-018-1381-1	Transactions of the Indian Institute Metals
8	Dr.T.Balusamy	Behavior of Hydrogen during Manufacture of Rail Steel	Vol 72 PP 2505- 2515	https://doi.org/10.1007/s12666-019-01798-7	Transactions of the Indian Institute Metals
9	Dr.T.Balusamy	Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition	Volume-15 885-896	https://doi.org/10.1016/j.dt.2019.05.014	Defense Technology
10	Dr.R.Jamuna	Investigation of CNC errors by Wireless Ball bar tester ,Square Circle Diamond Test and CMM	Vol .14 PP 3392-3399	ISSN: 1748-0345	Taga Journal Of Graphic Technology
11	Dr.R.Jamuna	Measurement of error in computer numerical control machines and optimization using teaching–learning-based optimization algorithm	Vol 52 PP929-937	DOI:10.1177/0020294019847699	Measurement and Control
12	Dr.K.Sakunthala	Performance Analysis Of Solar Water Heater Integrated With Sodium Acetate Trihydrate As Phase Change Material	Vol 5 PP 11-18	ISSN: 2394 –4854	International Journal of Research and Innovation in Engineering Technology
13	Dr. S. Sivalakshmi	Effect of salinity gradient solar pond upon addition of CaCO3	Vol 5 PP 1-6	ISSN: 2394 –4854	International Journal of Research and Innovation in Engineering Technology
14	Dr. S. Sivalakshmi	Effect of salinity gradient solar pond upon addition of CaCO3	Vol 5 PP 1-6	ISSN: 2394 –4854	International Journal of Research and Innovation in Engineering Technology
15	Dr. S. Sivalakshmi	Study of thermal stability of solar pond integrated with solar collector	Vol 5 PP 7-10	ISSN: 2394 –4854	International Journal of Research and Innovation in Engineering Technology
16	Dr. S. Sivalakshmi	Numerical investigation of unsteady buoyancy driven indoor air flow characteristics under various range of internal heat generation	Vol 17 PP 295-315	DOI: 10.1504/IJESD.2018.093243	International Journal of Environment and Sustainable Development
17	Dr. S. Sivalakshmi	Optimization of window type and vent parameters on single- sided natural ventilation buildings	Vol 136 PP 367-379	https://doi.org/10.1007/s10973-018-7913-4	Journal of Thermal Analysis and Calorimetry
18	Dr.A.Baraniraj	Surface properties of Ni-SiC nano composite electrodeposited coating on aluminum 6061 alloy	vol. 5, no.2, pp. 1-9.	ISSN: 2348-4918	International Journal of Innovation In Engineering Research & Management

Publication Details: (2018-2019)

S.NO	NAME	Publication details	VOL &PP	DOI	WEB OF SCIENCE
1	Dr.V.Satheeshkumar	Microstructure study on electro discharge deposited magnesium alloy with semi sintered electrode and sintered electrode.	Vol.6, Number 12, November 2019.	DOI:10.1088/2053-1591/ab560e	Materials Research Express
2	Dr.V.Satheeshkumar	Surface modification of ZE41A Magnesium Alloy using discharge coating with semi sintered electrode.	Vol.21, Issue 5-6, PP.375- 389. October 2019.	DOI: 10.1504/IJMMM.2019.103134	International Journal of Machining and Machinability of Materials
3	Dr.R.Vijayan	Influence of Corrugated Booster Reflectors in a Centrally Finned Twist Inserted Solar Thermal Collector on Heat Transfer and Thermal Performance Characteristics	Vol. 141 / 062001-1	DOI: 10.1115/1.4043172	Journal of Heat Transfer ASME
4	Dr.T.Balusamy	Hydrogen Anti-Flaking Heat Treatment in VAR89S Rail Steel	Vol.72 PP 2729-2737	https://doi.org/10.1007/s12666-019-01747-4	Transactions of the Indian Institute Metals
5	Dr.A.Baraniraj	Mechanical Behavior of Jute and E-Glass Fiber Reinforced Composite Pipes	vol. 7, no. 04, pp. 880-882.	ISSN (online): 2321-0613	International Journal for Scientific Research & Development

S.NO	NAME	Publication details	VOL &PP	DOI	WEB OF SCIENCE
1.	Dr.M.Raja	Experimental study of heat transfer coefficient on red clay brick wall	10.1007/s10973-021-10896-y 2021	https://doi.org/10.1007/s10973-021-10896-y	Journal of Thermal analysis and calorimetry
2	Dr.S.Sivalakshmi	Experimental study of heat transfer coefficient on red clay brick wall	10.1007/s10973-021-10896-y 2021	https://doi.org/10.1007/s10973-021-10896-y	Journal of Thermal analysis and calorimetry
3	Prof.P.Natarajan	Wear behaviour of Ni-Tio2 nano composite coating on AISI1022CS by pulse electro deposition	Vol.23 Issue 36 PP1 77-101	https://doi.org/10.14447/jnmes.v23i3.a04	Journal of New materials for electro chemical systems
4	Prof.P.Natarajan	Mechanical morphological characteristic study of chemically treated banana fibre reinforced phenolic resin composite with Vajram resin	PP 1-16	https://doi.org/10.1080/15440478.2020.1870622	Journal of Natural fibers
5	Dr.D.Lavanya	Optimization of process parameter for magnesium alloy processed in wire-cut EDM	Vol. 11, Issue 7 1934-1939	ISSN 2229-5518	International Journal of Scientific & Engineering Research
6	Dr.D.Lavanya	Performance of Shell and Tube Heat Exchanger with Various Helical Baffles	Volume 2, Issue 4270-274	DOI: 10.35629/5252-0204270274	International Journal of Advances in Engineering and Management (IJAEM)
7	Dr.M.Mohan Raj	Mechanical morphological characteristic study of chemically treated banana fibre reinforced phenolic resin composite with Vajram resin	PP 1-16	https://doi.org/10.1080/15440478.2020.1870622	Journal of Natural fibers
8.	Dr.M.Mohan Raj	Effects of Di Tertiary Butyl Ether fuel additives on diesel engine performance and emission characteristics using bio diesel	In Press	https://doi.org/10.1016/j.matpr.2021.03.670	Materials Today: Proceedings https://doi.org/10.1016/j. matpr.2021.03.670
9.	Dr.V.Satheeshkumar	An investigation on electrical discharge metal matrix coating of ZE41A magnesium alloy	Vol 314& 1-11	https://doi.org/10.1051/metal/2021034	Metallurgical Research and Technology
10.	Dr.V.Satheeshkumar	A Study on Tribological Behavior of Electro Discharge Deposited ZE41A Magnesium Alloy Using Wear Map	Vol 2 & 391-396	DOI: 10.24425/amm.2021.135870	Arch. Metall. Mater
11.	Dr.V.Satheeshkumar	Wear Behavior of WC–Cu Deposited ZE41A Magnesium Alloy Using Wear Mechanism Map	Vol 12 & 1-6	https://doi.org/10.1166/asem.2020.2640	Advanced Science, Engineering and Medicine
12.	Dr.R.Jamuna	Experimental investigation of computerized inspection techniques in CNC Manufacturing systems	Vol.7, Issue 8 aug 2020	e-ISSN :2395 -0056 p-ISSN :2395 -0072	International Research Journal of engineering and technology 2395-0056
13.	Dr.V.Satheeshkumar	Effect of parameters on microstructure of electrical discharge coated ZE41A magnesium alloy with tungsten carbide-copper composite electrode	Vol.9 & 1-11	DOI:10.1088/2051-672X/abf326	Surface Topography: Metrology and Properties
14.	Dr.V.Satheeshkumar	Surface modification of a magnesium alloy by electrical discharge coating with a powder metallurgy electrode	Vol .4, 360-367	https://doi.org/10.1515/mt-2020-0054	Materials Testing
15.	Dr.V.Satheeshkumar	A Study on Tribological Behavior of Electro Discharge Deposited ZE41A Magnesium Alloy Using Wear Map	Vol 2 & 391-396	DOI: 10.24425/amm.2021.135870	Arch. Metall. Mate
16.	Dr.A.P. Sathiyagnanam	Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDI diesel engine fueled with WHDPE oil/diesel blends	In Press	DOI:10.1016/j.fuel.2020.118304	International Journal of FUEL https://doi.org/10.1016/ j.fuel.2020.118304
17.	Dr.A.P. Sathiyagnanam	Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications	In Press	DOI:10.1016/j.fuel.2020.118315	International Journal of FUEL https://doi.org/10.1016/ j.fuel.2020.118315
18.	Dr.A.P. Sathiyagnanam	Emission profiling of a common rail direct injection diesel engine fueled with hydrocarbon fuel extracted from waste high density polyethylene as a partial replacement for diesel with some modifications	Volume: 32 issue: 3, page(s): 481-505	https://doi.org/10.1177/0958305X20942873	International Journal of Energy & Environment
19.	Dr.A.P. Sathiyagnanam	Artificial Neural Network based prediction of a direct injected diesel engine performance and emission characteristics powered with biodiesel	In press	DOI:10.1016/j.matpr.2020.08.015	International Journal of Materials Today: Proceedings https://doi.org/10.1016/j. matpr.2020.08.015.
20.	Dr.A.Baraniraj	Machining and Optimization of Process Parameters For Titanium Alloy In WEDM Using ANN	vol. 17, no.1, pp.014-025	DOI : http://dx.doi.org/10.21172/1.171.03	International Journal of Latest Trends in Engineering and Technology
21.	Dr. A. Baraniraj	MRR And Crack Propagation Behavior of Burr Cover Plate Bio Implants Made By 316l SS & A203 LAS Machined In WEDM’	vol. 16, no.1, pp.018-025	DOI: http://dx.doi.org/10.21172/1.164.03	International Journal of Latest Trends in Engineering and Technology

Publication Details: (2020-2021)

Publication by Students

PUBLICATION BY THE STUDENT

No.

Register

Name of the Student

Paper Title

ConferenceDetails

1953102

DhiliepanR

Design And Fabrication Of Organic Waste Compost Machine